DynaTec Induction Heater
Specifically for use with Dynavaps, this well-powered induction heater engineered by DynaTec will heat your Dynavap to the perfect temperature in 5 - 10 seconds.
Perfect for those who like to use their Dynavap in the house, this device makes for an easy, smooth vaping experience. Simply place your Dynacap (stainless steel or titanium) into the hole and press down lightly until the green LED shows red.
This is an added safety measure to ensure it is not heating all the time. You will hear the heat-up “click” and are now ready to take a draw. It also features an automatic cut-off to stop heating after 15 seconds for your safety.
The unit also has a handy magnet attached to the top so you can cool your vape off between uses.
The overall appearance is quite robust, featuring a durable printed top and rubber feet to stop it from slipping away. Large enough to look good on your desk but small enough to bring it to a friend’s house too!
Currently only available with EU plug. Check out our travel adapters here.
FAQ:
What is an Induction Heater?
An induction heater heats material by means of an electric current that is caused to flow through the material or its container by electromagnetic induction. The Apollo 2 heats when you push down on your dynavap to start the current.
How do I use the Apollo 2 Induction Heater?
After plugging it in, simply place your loaded Dynavap into the hole, cap downwards, and lightly press down until you see the red L.E.D light appear (there is a switch you push against to start the heater). Hold until you hear the heat up “click”. You are now ready to take a draw.
Why is there a magnet on top of the Apollo 2 Induction Heater?
The magnet allows you to set your Dynavap onto it to cool it down again between uses. Pro tip: If you want dense vapor, try skipping a heat cycle. Heat it up normally but do not inhale when you get the click just set it down on the magnet. When the cool-down click occurs put it right back in and heat til the click and you should get some really great vapor production.
What's Included:
- DynaTec Heating Unit
- EU Cable/Plug
Specs:
| Weight |
200g |
| Size |
117mm X 87mm X 47mm
|
| Plug |
12V ACDC adapter
|
×
Get it between - 
