Arizer Go SRT

Get it between -

Arizer Go SRT Vaporizer

Arizer are one of the most genuine and passionate team of people making dry herb vaporisers with big releases like the Solo 3 and XQ2. The GO SRT Vaporizer is easily one of their most mind-blowing vapes yet. Powered by the new SRT operating system, it heats up in 5–15 seconds flat, maintains a precise temperature from 50°C to 220°C, and delivers clean, flavourful vapour through an isolated all-glass vapour path — all from a device that fits comfortably in your jacket pocket. Moreover the Go Shell system, Arizer's version of a pod and dosing system, improves the air flow rather than restricts it.

What makes the Arizer Go SRT Vaporiser different from everything else Arizer has made is the V-Scale™ performance system — a session framework built around actual volatilization science rather than a simple temperature dial. With the Go SRT Vape you pick your intensity, press a button, and you're ready in seconds. It's built for people who want powerful, on-demand sessions without fiddling around with complicated settings.

• 5–15 second heat-up from cold
• 75/25 hybrid convection oven for even, thorough extraction
• Isolated all-glass vapour path throughout
• 50°C to 220°C with 1° precision adjustment
• Up to 60 minutes of continuous use per charge
• 21700 user-replaceable battery with USB-C PD fast charging
• Use-while-charging support — no interruptions mid-session
• Three fully editable presets controlling both temperature and heat time

5 Questions People Ask Before Buying the Arizer Go SRT

1. What can you actually use it for? The Arizer Go SRT is for dry herbs, not concentrates, that's what the 75/25 hybrid convection oven is built around. The Canadian team at Arizer also built in a genuine hand warming mode which sounds like a novelty until you're standing outside in November. Arizer officially describe the Go SRT as a "multi-purpose portable heater,"

2. Is it genuinely pocket-friendly? Yes, and more so than previous Arizer portables. At 110mm tall and 237g, it's among the smallest devices in Arizer's current range. The magnetic On-The-Go Cap seals the glass vapour path so you're not worrying about it in your pocket. So no worrying about exposed glass pieces.  It's not tiny, but it's genuinely pocketable.

3. How much temperature control do you get? A lot. You get three fully editable presets where you set both the temperature (50°C–220°C) and the heat/session time independently. So you're not just picking a number, you're building a session profile. The default presets are 200°C/30 sec, 190°C/2 min, and 180°C/5 min. Change them to whatever suits you.

4. How fast is the heat-up, really? 5–15 seconds. That's from cold, not from standby. For context, the Air SE takes under 60 seconds and the Solo II MAX is under 30. The Arizer Go SRT heat up is in a different league. You press the button and it's basically ready by the time you've got comfortable.

5. What's the warranty situation for UK buyers? Strong. The heating element is covered for life, and the device and battery carry a 2-year limited warranty from Arizer. Worth noting too that the battery is user-replaceable, so even outside the warranty period you're not looking at a dead device.

Arizer Go SRT Key Features

• 75% convection, 25% conduction hybrid oven — even extraction without dry spots
• Isolated all-glass vapour path from oven to mouthpiece
• 14mm borosilicate glass WPA included; 19mm also compatible
• V-Scale™ system — precision-tuned for Fast and Rapid tiers
• 5–15 second heat-up from cold to session-ready
• Three fully editable presets (temperature + heat time, set independently)
• 50°C–220°C temperature range in 1° increments
• Auto-off timer: 20–60 minutes, adjustable
• Up to 60 minutes continuous use per charge
• 21700 user-replaceable battery
• USB-C PD (5V, 3A) fast charging — use while plugged in
• Vertical LED display with real-time three-stage session feedback
• Automatic display and control inversion for water pipe use
• Dark Mode display option
• Device lock with passcode (can be disabled)
• Aromatic diffusion and hand warming modes

Go SRT Build and Design

The Go SRT is 110mm tall, 237g, and has a solid feel to it with a sturdy aluminium chassis, matte black finish, no wobble or flex when you hold it. It looks the part without trying too much. The magnetic On-The-Go Cap is just a small detail that makes a big practical difference. If you've ever pulled an older Arizer out of your bag with the glass already dislodged, or panicked about a stem snapping mid-pocket, you'll appreciate the Go SRT Vape immediately.

The front panel runs a vertical LED bar display that tracks your session through three live stages — more on that below. It's clean and easy to read, and the Dark Mode option dims things down nicely if you're somewhere you'd rather keep things low-key. Three buttons run down the right side: ACTION, UP, DOWN. That's it. One-handed use is comfortable even with bigger hands.

At the top, the glass vapour path connection is the same borosilicate glass-on-glass design Arizer have used since the original ArGo. No rubber seals touching your vapour path, no plastic in the air path at all. The isolated air path is verified on the official spec sheet — every draw goes through glass and glass only.

The Go Shell System

If you haven't used an Arizer portable before, the Go Shell system is worth understanding before you buy. Rather than packing directly into a fixed oven, you load small glass capsules called Go Shells and insert them into the device. Each shell holds up to 0.3g. When you're done, pull it out, pop in a fresh one, press ACTION, and you're heating again in under 15 seconds.

The practical upside is that you can pre-load several shells at home and carry them in the included PVC Travel Tubes. No loose material, no mess mid-session, no fumbling around. It's the reason the Go SRT works as well as it does for on-the-go use. The optional Go Shell Case (sold separately) lets you carry a full session loadout in one organised, travel-ready kit.

Four Ways to Use the Glass

The Go SRT supports four distinct glass configurations — more flexibility than the marketing materials make immediately obvious:

• Go Shell + Go Glass Mouthpiece — wide-open airflow, powerful and direct. The setup the V-Scale Fast and Rapid tiers are tuned for.
• Go Glass Aroma Tube — classic all-glass simplicity. Slightly more restricted draw, smoother delivery.
• Go Shell + 14mm or 19mm Go WPA — connects to any compatible water pipe or bubbler for water-filtered, cooled vapour.
• Go Frosted Glass Aroma Tube + WPA — full glass-on-glass water pipe connection. The Frosted Aroma Tube is sold separately but creates the cleanest possible water pipe draw.

How to Load the Go SRT

1. Grind your material. Medium to coarse works best. Too fine and you'll restrict the airflow the convection system needs.

2. Insert a filter screen. Drop a stainless steel filter screen into the open end of the Go Shell or Glass Aroma Tube before filling.

3. Fill the chamber. Add up to 0.3g — don't pack it tight. Convection heating needs room to work; compacted material kills airflow and uneven extraction follows.

4. Lightly tamp and leave a gap. Press the material down gently and aim for a 1–2mm gap at the top. That space is where the hot air does its job.

5. Quick-fill method. If you want the fastest loading approach, place your ground material in a small container and twist the shell or tube directly into it. Fills cleanly in one motion.

Pro Tip

Pre-load five or six shells before you head out, cap them, and drop them in the Travel Tubes. When you need a session you're not hunting for a grinder — just swap, press ACTION, and go. It's the most practical workflow available in any portable vaporizer at this price, and it's the reason the Go SRT earns its "made for on-the-go use" claim rather than just asserting it.

V-Scale™: What the "V" Actually Stands For

The V in V-Scale™ stands for Volatilization — the process by which heat converts the active compounds in botanical material into vapour. Arizer built the V-Scale™ framework around this principle rather than just temperature alone, which is what makes it more useful than a standard dial. The system accounts for how heat, airflow, and device tuning combine to produce different extraction results — then maps that into four tiers that make sense to use in practice:

• Gentle — low temperatures, subtle flavour, soft vapour. Good for aromatic diffusion.
• Moderate — balanced extraction. A reliable everyday session tier.
• Fast — stronger draws, bolder flavour, noticeably thicker vapour.
• Rapid — maximum power. Dense, full hits on demand.

Arizer specifically state that the Go SRT is precision-tuned for the Fast and Rapid tiers. The instant-heating ceramic element, the wide-open airflow of the Go Shell system, and the 75/25 oven ratio are all calibrated around high-performance extraction. If you primarily want gentle, flavour-only sessions at low temperatures, the Go SRT will do it — but it's built for something more demanding than that.

Reading the Display: Three Session Stages

The vertical LED bar display shows your session progress across three distinct stages, in real time. Once you understand this, using the Go SRT becomes completely intuitive:

• Heat-Up — bars light up yellow as temperature rises. At 5–15 seconds, this phase is over almost immediately.
• Heat Time — bars turn white and count down the duration of your session at the preset temperature. This is fully editable — 30 seconds for a quick hit or up to your preset maximum.
• Residual Heat — after Heat Time ends, the oven cools gradually. Keep drawing through this phase. A lot of the remaining flavour lives here.

Knowing when to draw, how long you have, and when the session is winding down — it's all on the display without needing to dig into a menu or check a phone app.

Default Presets — and How to Change Them

Out of the box, Arizer load three starting presets that cover most use cases:

• Preset I — 200°C / 30 seconds
• Preset II — 190°C / 2 minutes
• Preset III — 180°C / 5 minutes

These are starting points, not fixed settings. Double-press the ACTION button at any time to enter Preset Edit mode and adjust both temperature and heat time for any preset. The range is 50°C–220°C in 1° increments for temperature, and each heat time is independently adjustable. Most people settle on their own profiles within the first few sessions.

The Hybrid Oven: 75% Convection, 25% Conduction

The Go SRT's oven runs a verified 75/25 convection-to-conduction split — the same ratio used in the Air SE, Air MAX, and Solo II MAX. Convection does the heavy lifting: hot air circulates through the material to release flavour and active compounds without direct burning. The 25% conduction contribution comes from the heated oven walls, which accelerates heat transfer and adds body to the vapour, especially on higher-intensity sessions. The result is extraction that's even and efficient, without the harsh, overcooked taste you get from purely conduction-based devices.

Water Pipe Adapter

The included 14mm borosilicate glass WPA connects the Go SRT to any compatible water pipe or bubbler. For WPA sessions, Arizer recommend pairing the WPA with Go Shells rather than the Glass Aroma Tube — the wide-open airflow of the shells works better against the resistance a water piece adds. The Go SRT also supports 19mm WPA connections (sold separately), which opens up compatibility with a wider range of glassware.

When the device is flipped for water pipe use, the automatic display and control inversion kicks in. The LED display and button functions rotate automatically so everything stays readable and intuitive, regardless of orientation. No staring at an upside-down screen mid-session.

Battery, Charging, and Longevity

The Go SRT runs on a 21700 lithium-ion battery — a high-capacity cell format shared with the flagship Solo III v2.0. You get up to 60 minutes of continuous use per charge, which in practice translates to a solid number of sessions per day. Charging is via USB-C PD at 5V/3A, which is meaningfully faster than the Air SE's standard 5V/2A. You can also run the device while it's plugged in, which is more useful than it sounds if you're at a desk or just topping up between sessions. 

The big long-term point: the 21700 battery is user-replaceable with basic tools. Most portable vaporizers in this price range effectively become landfill once the battery degrades. The Go SRT doesn't have that problem — replace the cell and it's back to full performance.

How to Use the Arizer Go SRT

The Go SRT is designed to be used without a manual once you've spent a session or two with it. Three buttons handle everything. Here's the full rundown:

1. Power On. Hold the ACTION button for 3 seconds. Three circles appear, then a "Hi!" from Arizer. Takes a second.

2. Unlock. If the lock is on, press UP → DOWN → UP. The unlock sequence is printed on the base of the device in case you forget it.

3. Start Heating. Press ACTION once. Bars turn yellow as the temperature climbs. At 5–15 seconds, they're all yellow and you're ready.

4. Draw. Bars turn white and count down your heat time. The device holds the preset temperature throughout — you're drawing at a consistent temperature, not guessing.

5. Residual Phase. When heat time ends, keep drawing. The oven cools gradually from here and the residual phase is worth using fully.

6. Switch Presets. Press UP or DOWN to cycle between your three presets. The display shows each preset's temperature and heat time as you navigate.

7. Edit Presets. Double-press ACTION to enter edit mode. Set your temperature and heat time independently for that preset.

8. Session Toggle. Hold UP to check battery percentage, see your remaining auto-off time, or add +5 minutes to the current session — all without going into settings.

9. Settings. Hold DOWN to open the settings menu:

• Temperature units (°C or °F)
• Sound alerts and volume
• Vibration (haptic) feedback
• Display brightness
• Dark Mode
• Display inversion (for WPA sessions)
• Device lock and passcode
• Auto-off timer (20–60 minutes)

10. Power Off. Hold ACTION for 3 seconds to shut down.

How the Go SRT Sits in Arizer's Portable Lineup

If you're choosing between Arizer portables, here's where the Go SRT actually lands. It's the smallest and fastest-heating device in the range — but it trades some battery life for that speed. The Solo II MAX and Solo III v2.0 last three times as long per charge if extended sessions are your priority. The Air SE and Air MAX use removable batteries, which some people prefer. But nothing in the Arizer range comes close to the Go SRT's heat-up time, and nothing else uses the Go Shell pre-load system.

Spec	Go SRT	Air SE	Air MAX	Solo II MAX	Solo III v2.0
Height	110mm	128mm	122mm	113mm	130mm
Weight	237g	160g	103g	210g	280g
Heat-Up Time	5–15 sec	<60 sec	<60 sec	<30 sec	5–15 sec
Run Time	Up to 60 min	Up to 135 min	Up to 80 min	Up to 180 min	Up to 180 min
Battery	21700 (user-replaceable)	26650 (removable)	18650 (removable)	Dual 18650	Dual 21700
Charging	USB-C PD (5V/3A)	USB-C (5V/2A)	Micro-USB	USB-C (5V/3A)	USB-C PD (5V/3A)
Temp Range	50–220°C	50–220°C	180–210°C	50–220°C	50–220°C
Max Bowl	0.3g	0.3g	0.3g	0.3g	0.5g
Oven Split	75/25 hybrid	75/25 hybrid	75/25 hybrid	75/25 hybrid	80/20 hybrid
WPA Included	14mm ✅	14mm ✅	None ❌	14mm ✅	14mm ✅
Session Presets	3 editable (temp + time)	1° & 10° increments	5 preset temps	1° & 10° increments	1° & 10° increments + programmable presets
Dark Mode	Yes	Auto-Dimming	No	Auto-Dimming	Yes

 

What's In the Box?

• 1 × Arizer Go SRT Vaporizer
• 1 × On-The-Go Cap
• 1 × Go Shell Grip
• 1 × Go Shell
• 2 × Go Stem Caps
• 1 × Go Glass Mouthpiece
• 1 × Go WPA (14mm Water Pipe Adapter)
• 1 × Go Glass Aroma Tube + Cap
• 1 × USB-C to USB-C Charging Cord
• 5 × Stainless Steel Filter Screens
• 1 × Stainless Steel Cleaning Brush
• 1 × Stainless Steel Stirring Tool
• 3 × PVC Travel Tubes with Caps (2 standard + 1 large 90mm)
• 1 × Operating Instructions

Arizer Go SRT Technical Specifications

Device Type	Portable dry herb vaporizer / multi-purpose portable heater
Heating Method	Hybrid: 75% convection, 25% conduction
Heating Element	Instant-heating ceramic with convection technology
Vapour Path	Isolated all-glass (borosilicate glass throughout)
Glass Loading System	Go Shells & Go Glass Aroma Tubes
Performance System	V-Scale™ — Gentle / Moderate / Fast / Rapid (tuned for Fast & Rapid)
Temperature Range	50°C – 220°C (122°F – 428°F)
Temperature Increments	1° and 10° adjustments
Heat-Up Time	5–15 seconds
Session Presets	3 fully editable (temperature + heat time set independently)
Default Presets	200°C / 30s · 190°C / 2 min · 180°C / 5 min
Auto-Off Timer	20–60 minutes (adjustable)
Run Time	Up to 60 minutes continuous per charge
Battery	High-capacity 21700 Li-Ion (user-replaceable with basic tools)
Charging	USB-C PD (5V, 3A) — use-while-charging supported
Max Bowl Capacity	0.3g
WPA Compatibility	14mm (included) & 19mm (sold separately)
Device Height	110mm
Device Weight	237g
Display	Vertical LED — Celsius & Fahrenheit, Dark Mode, auto-inversion
Isolated Air Path	Yes
Additional Modes	Aromatic diffusion, hand warming
Heating Element Warranty	Lifetime
Device & Battery Warranty	2-year limited warranty

The Bottom Line on the Arizer Go SRT

If fast, on-demand sessions are what you're after, the Arizer Go SRT is the best portable in Arizer's lineup for that. The heat-up speed is genuinely impressive, the all-glass vapour path keeps flavour clean from oven to mouthpiece, and the Go Shell system makes it practical to use out in the world rather than just at home. For speed, portability, and build quality in a compact form, the Go SRT earns its place as the most capable portable dry herb vapes Arizer have ever made.

All information sourced directly from official Arizer manufacturer documentation and our own hands-on experience with the product.